Piping Foot #38 is often also termed the “uneven foot”, owing to the different thicknesses of the two halves of its sole. Consequently, this foot is ideal for creating narrow-to-medium piping, as well as for sewing unevenly thick fabric layers.

The right side of Piping Foot #38 is higher than the left side, allowing it to ride easily over the fabric layers as you sew. In addition to piping, this foot is also suitable for sewing on thick tape and ribbon, cords, or hook-and-loop tape.

TIP: when sewing on tape, the tape should lie under the right side of the foot flush with the edge of the thicker left side. This will allow the needle to catch the edge of the tape more easily. 

When ordering this foot, please ensure that you have chosen the right category for your machine. There is a category break down below. If you can't find your machine don't hesitate to contact us on 01633 284646 and we will be happy to help.

Category A - Available - Bernina 910, 930, 931, 932, 933, 940, 950, 1000, 1001, 1004, 1005, 1006, 1008, 1010, 1011, 1015, 1020, 1021, 1030, 1031, 1050, 1070, 1080, 1090, 1091, 1120, 1130, 1230, 1240, 1241, 1260, 1530, 1630

Category B - Available - Bernina Activa 125, 125s, 135, 135s, 145, 145s, 210, 215, 220, 230, 230PE, 240, 250, 330, 350PE, 380

Category C - Available - Bernina Virtuosa 150, 153, 153QE, 155, 160, 163

Category D - Available - Bernina Aurora 430, 440QE

Category D1 - Available - Bernina B530, B550QE

Category E - Available - Bernina Artista 165, 170

Category E1 - Available - Bernina 180, 185

Category F - Available - Bernina Artista 630

Category F1 - Available - Bernina Aurora 435, 450, 640, 580

Category F2 - Available Bernina 7 Series

Category F3 - Available Bernina 7 Series

Category G - Available - Bernina Artista 200, 730

Category G1 - Available - Bernina 750QE (7 SERIES)

Category H - Available - Bernina 820, 830